Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, Washington DC, North Carolina, South Carolina, and Maryland, specializing in VA home loans and first-time homebuyer programs.

You found a home that needs work, and now you are weighing a Fannie Mae HomeStyle Renovation loan against an FHA 203(k). Both roll the purchase price and the repair budget into one mortgage, but they differ in who qualifies, what work is allowed, how mortgage insurance is priced, and how much oversight the project gets. Neither is automatically cheaper or better.

Duane Buziak walks clients through seven decision strategies, in the order they usually matter. Program details below reflect what was published as of 2026, but caps, minimums, and mortgage insurance tiers change, so confirm them at HUD’s 203(k) page and Fannie Mae’s HomeStyle page before you commit.

1. Start with your credit and down payment, not the renovation list

Most buyers begin with the wish list: kitchen, roof, a bathroom that has to go. But the borrower profile often decides the program before the scope does. FHA financing is built for lower credit scores and smaller down payments. Conventional financing, which includes HomeStyle, tends to reward stronger credit with cheaper mortgage insurance and a mortgage insurance policy that can be cancelled.

Consider an illustration. A buyer with a 620 FICO score and 4% down will probably find the 203(k) more accessible, since FHA allows a 3.5% down payment at a 580 score and above. A buyer with a 740 FICO score and 10% down is in a different position: conventional pricing and PMI are likely to be more favorable, so HomeStyle deserves a serious look. Lender overlays vary, so the minimums printed in the guidelines are a floor, not a promise.

A practical sequence:

  1. Start with a NoTouch Credit Process pre-qualification. A NoTouch Credit Pull lets Duane Buziak review your profile without a hard inquiry hitting your credit while you are still deciding.
  2. Write down your credit score, available cash (down payment plus reserves), and debt-to-income ratio.
  3. Compare those three numbers against each program’s current minimums at hud.gov and fanniemae.com.
  4. Ask which programs you qualify for and at what down payment, before discussing scope at all.

The common mistake is falling in love with a renovation plan and discovering later that your credit profile only qualifies for one of the two programs. Reverse the order and you avoid that disappointment. If you are buying your first home, our guide to mortgage loan programs for first-time buyers can help you see where each option fits.

What to measure: a pre-qualification approved for at least one program, with a down payment and monthly payment you can sustain after the renovation costs are in the loan, not just at today’s purchase price.

2. Match the program to your renovation scope and property type

Scope, how you will use the property, and the type of project decide which program is even allowed. HomeStyle is flexible: it can fund a wide range of improvements, including some that are not strictly necessary repairs, and it is available for primary residences, second homes, and, with tighter terms, investment properties. The 203(k) is aimed at owner-occupants and has two versions. The Limited version covers non-structural repairs up to a cap set by HUD, and the Standard version handles structural work and larger projects, with a HUD consultant involved.

For example, imagine a buyer who wants a new pool and an outdoor kitchen on a second home. That fits HomeStyle, because the 203(k) does not allow luxury amenities and requires owner occupancy. Now imagine a buyer replacing a roof and HVAC on a primary residence. That scope fits the 203(k) Limited neatly, with a smaller project and lighter paperwork.

Here is how the two programs line up on the dimensions that usually decide the question:

To put this into practice, list every project, sort them into essential and discretionary, confirm whether you will live in the home, and ask Duane Buziak to check each item against program rules. For a broader look at how renovation financing works for properties in rough shape, see our guide to a renovation loan for fixer-upper homes.

The common mistake is assuming every upgrade is eligible. Another misconception is that HomeStyle is only for luxury work, when it works well for ordinary repairs too. What to measure: every planned project item confirmed eligible in writing before you make an offer.

3. Run the mortgage insurance math over your expected time in the home

A low down payment is not the same as a low cost. FHA charges an upfront mortgage insurance premium (MIP) of 1.75% of the base loan plus an annual MIP, and for borrowers putting down less than 10%, the annual premium has historically lasted the life of the loan. Conventional PMI has no upfront charge in most cases, varies with credit score and down payment, and can be removed once your equity reaches the required threshold. How long you plan to keep the loan decides which structure costs more.

Here is a hypothetical worked example. Suppose the combined purchase-plus-renovation total is $400,000.

The monthly figures look close, and FHA even looks slightly cheaper. Now add duration, using flat balances to keep the arithmetic simple (real premiums decline as the balance falls). At 5 years, FHA costs $6,755 + $10,615 = $17,370, against $11,400 for PMI. At 7 years, FHA is $6,755 + $14,861 = $21,616, against $15,960. At 10 years, FHA is $6,755 + $21,230 = $27,985, while PMI, if removed around year 9, totals about $20,520. The conventional borrower also put $6,000 more down, so the real comparison weighs that cash too. These inputs are assumptions; your actual premiums depend on credit and current schedules.

Duane Buziak, NMLS #1110647, builds these side-by-side comparisons for clients during pre-qualification.

Ask for payment and total insurance cost at 5, 7, and 10 years, plus the point at which PMI can be removed. The common mistake is comparing only the monthly payment while overlooking that FHA MIP can last the life of the loan. What to measure: total mortgage insurance paid over your realistic holding period under each program. Remember, also, that an FHA loan can sometimes be refinanced later into a conventional one, which changes the long-run picture.

4. Plan around the contractor requirements each program imposes

Renovation money is not handed over at closing. It is held in escrow and released in draws as work is completed and inspected, which means contractor documentation drives the schedule. The 203(k) Standard involves a HUD consultant who writes up the scope and inspects the work. HomeStyle uses its own plan review and draw process, and rules on borrower-performed work are tighter than many buyers expect. Whether you can act as your own general contractor is a question to answer with your broker, not assume.

Imagine two buyers. The first has a licensed contractor and a cosmetic scope, and either program works. The second plans to self-manage and do part of the work, so they must confirm up front whether HomeStyle will allow it, because the 203(k) generally will not let a borrower get paid for their own labor without conditions.

Steps that keep this stress-free:

  1. Gather two or three written bids before you finalize the program.
  2. Confirm each contractor’s license and insurance.
  3. Ask whether a HUD consultant is required for your scope.
  4. Confirm the draw schedule and make sure it matches how the contractor actually works and gets paid.

Ask every company you talk to, whether a national name like Rocket Mortgage or Movement Mortgage or an independent broker, whether it offers renovation products and handles the draw process itself, since not every mortgage provider does. If your project involves ground-up work rather than a rehab, the construction-to-permanent loan process works differently and is worth comparing.

The common mistake is choosing a contractor after the offer is accepted, then learning they cannot meet program documentation requirements. What to measure: a signed bid and approved work write-up before closing, with a draw schedule that fits the contractor’s pace.

5. Build the timeline and contingency reserve into the loan structure

Renovation loans take longer than standard purchases. The appraisal must estimate the after-improved value, meaning what the home should be worth once the work is complete, and plans and bids need review before the file can close. Surprises are common too, which is why both programs use a contingency reserve, a portion of the budget held back for unexpected costs. Requirements and recommended percentages vary by program and project, so verify the current rules with your broker.

For example, imagine a 1960s home where opening the walls reveals outdated wiring. If the loan was structured with a financed contingency, the electrician’s change order is covered without you scrambling for new cash. Without it, the project stalls or you pay out of pocket at the worst moment.

To plan for this:

  1. Ask Duane Buziak for the required and the recommended contingency percentage for your program.
  2. Build the timeline with extra weeks for the appraisal, plan review, and bids.
  3. Coordinate with your agent so the contract dates reflect that timeline.
  4. Treat the contingency as a safety margin, not as extra budget to spend.

The common mistake is signing a purchase contract with a closing date that leaves no time for plans, bids, and the as-completed appraisal. Sellers often accept longer timelines if you explain why. What to measure: contingency funded at or above the program requirement, and a contract timeline accepted by every party.

6. Consider whether the renovation should go into a refinance instead

If you already own the home, a new purchase loan is not the only route. A renovation refinance, such as a HomeStyle refinance, replaces your current mortgage with a larger one that includes the project funds. A home equity line of credit leaves the first mortgage untouched and adds a smaller second lien. The right answer depends on what your existing mortgage is worth keeping. Our overview of home renovation loan options compares these paths side by side.

Take this illustration. An owner has a favorable existing first mortgage and a $40,000 project. A HomeStyle refinance would replace the entire balance with a new loan and new closing costs. A digital HELOC borrows only against the equity needed and leaves the first mortgage exactly as it is. If the existing loan carries terms that would be expensive to replace, preserving it can matter more than a tidy single payment.

To compare the two paths, gather these numbers:

Ask for options on both paths, then price them over the years you plan to stay. If you are also weighing a shorter term while you refinance, see whether it makes sense to refinance to a shorter loan term. The common mistake is refinancing a favorable first mortgage when a smaller second-lien option would have preserved it. HELOC terms can adjust over time, so weigh that against a fixed refinance. What to measure: total cost of each path across your planned time in the home, and whether the existing loan terms are preserved.

7. Consider niche alternatives: jumbo renovation, condo, and non-owner-occupied

Loan size, property type, and occupancy can move the best answer away from the two headline programs. For 2026, the baseline conforming loan limit is $806,500, and the high-cost area limit is $1,209,750, as published by the Federal Housing Finance Agency. A combined purchase-plus-renovation amount above the limit for your county pushes you toward jumbo territory, where renovation options are narrower and underwriting differs. Condos add their own eligibility questions, and investment properties change the program menu entirely. If you land in jumbo range, review jumbo loan down payment requirements before you set your budget.

For instance, imagine an investor buying a duplex to renovate. The 203(k) requires owner occupancy, so unless the investor will live in one unit, it is off the table. HomeStyle may allow investment use with a larger down payment, and some investors evaluate a DSCR-style structure, which qualifies the loan on the property’s rental income rather than personal income. The right choice depends on the numbers and on how the borrower earns. You can learn how that math works in our guide to DSCR loans for rental property investors.

To work this through:

  1. Confirm the 2026 conforming or high-cost limit for the property’s county against your total loan amount.
  2. Verify the property type is eligible, especially for condos and multi-unit buildings.
  3. State your occupancy plan honestly: primary, second home, or investment.
  4. If neither program fits, ask which alternatives exist for that specific property.

The common mistake is forcing a renovation into the 203(k) or HomeStyle when the loan size or property type sits outside program rules, which wastes weeks and can jeopardize the contract. What to measure: a program confirmed eligible for the specific property, loan amount, and occupancy plan.

Where to begin, and what to settle before you hire anyone

Start with the NoTouch Credit Process pre-qualification and the credit and down payment fit from strategy 1. Then lock down scope and property type (strategy 2) and run the insurance math (strategy 3) before you choose a contractor, since the program determines what the contractor must provide. The remaining strategies refine the plan once those three are settled.

Talk to Duane today for a no-obligation conversation with no credit impact, and see how an independent broker at Mortgage Shopping (Supra Mortgages / Duane Buziak Mortgage Maestro) can match the program to your plans and show you the total cost, not just a monthly number.

Leave a Reply

Your email address will not be published. Required fields are marked *