A Loan Estimate is a three-page form that shows what a mortgage is likely to cost, and most people read only the rate on page one. By the end of this guide you will know how to read a loan estimate disclosure form from the header to the final comparison box, spot the lines that shape your strategy, and compare two offers on program fit and total cost. You need your Loan Estimate (or the sample at consumerfinance.gov), your purchase or refinance details, and a calculator. Duane Buziak, NMLS #1110647, walks through it the way he would at a kitchen table with a client.
Step 1: Confirm the Basics and the Delivery Clock on Page 1
Start at the top of page one. Check the date issued, the property address, the loan purpose (purchase or refinance), the product (fixed or adjustable), the loan type (Conventional, FHA, VA, or USDA), and the rate-lock expiration date. A wrong loan type or a misspelled property address is the first thing to flag, because everything below it is built on those entries.
Then check the timing. Under the CFPB’s TRID rule, your broker must deliver the Loan Estimate within three business days of receiving a complete application, and you must receive the final Closing Disclosure at least three business days before closing. The Loan Estimate itself must be delivered or mailed no later than seven business days before closing. The CFPB explains the form and the timing in its Loan Estimate explainer, and it is worth reading once before you compare anything.
You do not need a hard credit pull to start understanding your options. Duane Buziak uses the NoTouch Credit Pull process for pre-qualification, so you can see which programs fit before you submit a formal application and before any hard inquiry lands on your report.
Mistake to avoid: treating the form as a commitment. A Loan Estimate is not a loan approval, and it is not a guarantee that the loan will close on these terms. It is an estimate, and the items marked “Can this amount increase?” matter more than the headline numbers. You will see exactly which ones those are in Step 6.
Step 2: Read the Loan Terms Box: Amount, Rate, Payment, and the Four Risk Questions
Just below the header is the Loan Terms box. It lists the loan amount, the interest rate, and the monthly principal and interest payment. Rates vary by borrower and by date, so the figure on your form reflects your profile on the day it was issued, not a number you should compare against what a friend was quoted last spring.
Next to each figure is a yes/no question. Read these carefully:
- Can the loan amount increase after closing? This is usually “No.” A “Yes” can point to negative amortization features.
- Can the interest rate rise? On a fixed-rate loan the answer is “No.” On an adjustable-rate mortgage (ARM) it is “Yes,” and the form states when the first change can occur and the maximum rate.
- Can the monthly payment rise? A fixed-rate loan holds principal and interest steady. An ARM, an interest-only period, or a payment that steps up will flip this to “Yes.”
- Is there a prepayment penalty or a balloon payment? Each has its own line, and each should read “No” on most mainstream programs.
If any answer is “Yes” and you expected a plain fixed-rate loan, ask your broker which feature triggered it and why that program was chosen for you. An adjustable product can be a sound strategy for someone who expects to sell in five to seven years, but it should be a choice you made, not a surprise.
Decision point: if the form shows a prepayment penalty, stop and ask which program caused it before reading further. A penalty changes your plan if you might refinance or sell within a few years, and some Non-QM and investor programs do carry one. You want to know that now, not at the closing table.
Step 3: Decode the Projected Payments Table
The Projected Payments table turns the loan into a real monthly number. It has three parts: principal and interest, mortgage insurance, and estimated escrow. The total is your estimated monthly payment, shown in columns by year.
The mortgage insurance line
What appears here depends on your program:
- Conventional: private mortgage insurance (PMI), typically when you put down less than 20%. It can come off once you reach sufficient equity.
- FHA: an upfront mortgage insurance premium (MIP) of 1.75% of the base loan amount, plus an annual MIP paid monthly. Annual MIP can last longer than PMI, sometimes the life of the loan, depending on your down payment and term. Verify the current tiers at hud.gov as of 2026.
- VA: no monthly mortgage insurance, but a funding fee, 2.15% for first use and 3.3% for subsequent use with a standard down payment, as of 2026. Exemptions apply, such as for veterans receiving disability compensation. Confirm at va.gov.
- USDA: an upfront guarantee fee and an annual fee.
Where the payment steps down
Look across the columns. If PMI is expected to end, the payment drops in the year shown. That step-down is a useful strategy marker, since it tells you how long the insurance cost lasts.
Mistake to avoid: comparing only the first-column payment between two offers. Check the “In escrow?” column too. If property taxes or homeowner’s insurance say “No,” they are not in that payment and you will pay them separately. One offer can look $400 cheaper per month simply because it leaves escrow out.
Step 4: Total the Closing Costs and Cash to Close
Below the Projected Payments table, page one reports Estimated Closing Costs and Estimated Cash to Close. These two figures are not the same. Closing costs are what the transaction charges. Cash to close is what you actually bring, after the down payment, deposits, and credits are factored in.
For the full build-up, turn to the “Calculating Cash to Close” table on page two. It starts with total closing costs and then adjusts for the down payment, your earnest money deposit, funds for the borrower, seller credits, and any lender credits. Each line is itemized, so you can see why the final figure is what it is.
Credits are where strategy enters. A lender credit lowers what you owe at closing, but it usually comes with a higher interest rate. Points work in the opposite direction. This is how “no-out-of-pocket closing options” are structured: credits offset costs in exchange for a different rate. That can be the right trade if you expect to move soon, and the wrong one if you plan to stay for fifteen years.
If you are using down payment assistance, find out how it appears. Programs such as Dynamo DPA (2.5% or 3.5%, 580 minimum FICO) and Turbo DPA (3.5% or 5%, 600 minimum FICO) may show as a credit toward cash to close, or as a separate second lien. Ask what you owe later, whether it is repayable, and when. A credit that is really a second lien is a future obligation, and it belongs in your total-cost thinking.
Tip: if the seller is contributing, ask that the seller credit be shown as its own line on the form rather than folded into a lump sum. A clearly labeled credit makes two offers far easier to compare.
Step 5: Audit Page 2 Section by Section (A through J)
Page two itemizes every charge, grouped by letter. Go in order.
Section A, Origination Charges. This holds broker compensation, processing and underwriting fees, and any discount points. Points are the line to run break-even math on. Suppose you have a $500,000 loan and are offered a $7,500 point charge that lowers your payment by $100 per month. Divide $7,500 by $100 and you get 75 months, or 6 years and 3 months, before the savings repay the cost. If you expect to move or refinance in under five years, you would pay for savings you never fully collect. If you plan to hold the loan well beyond six years, the points may earn their keep.
Duane Buziak, NMLS #1110647, runs this same check with every client before recommending a point structure.
Section B, Services You Cannot Shop For. These are items your broker selects, such as the appraisal and credit report. Section C, Services You Can Shop For, includes title and settlement services. You may choose your own providers for Section C, and the form should include a written list of providers. If you pick one from the list, the tolerance rules in Step 6 apply. If you pick one off it, they may not.
Section D totals A through C. Then read the rest:
- Section E: taxes and government fees, including recording fees and transfer taxes.
- Section F: prepaids, such as homeowner’s insurance premium and prepaid interest.
- Section G: the initial escrow payment at closing.
- Section H: other items, such as an owner’s title policy or HOA fees.
- Section I: the total of E through H.
- Section J: the total closing costs, D plus I, less any lender credit.
Step 6: Check Page 3 for Comparisons, APR, and Tolerance Rules
Page three opens with the Comparisons box. It shows four figures: the total you will have paid in principal, interest, mortgage insurance, and loan costs over five years; the principal you will have paid down in that time; the APR; and the Total Interest Percentage (TIP).
The APR expresses the cost of credit as a yearly rate and includes certain fees, such as points and some loan costs, so it usually sits above the note rate. It is not your payment. It is a standardized way to compare, and it can mislead when loan types differ, because it assumes you keep the loan its full term. The TIP is the total interest you would pay over the loan’s life as a percentage of the loan amount.
Tolerance: what can change
The CFPB’s rules limit how much certain charges can rise from your Loan Estimate to your Closing Disclosure. Confirm the details in the CFPB’s guidance:
- Zero tolerance: origination charges, transfer taxes, and services you could not shop for cannot increase.
- 10% tolerance: recording fees and shoppable services from a listed provider can rise by no more than 10% in total.
- No limit: prepaid interest, homeowner’s insurance premiums, and escrow deposits can change.
A revised estimate is allowed only for a valid changed circumstance, such as a new loan type, a changed loan amount, or a rate lock.
Other Considerations
Read the appraisal, assumption, homeowner’s insurance, late payment, refinancing, and servicing notes. They set out whether the loan can be assumed, what late fees apply, and whether your loan may be transferred to another servicer.
It also helps to see how programs differ on the form itself:
| Strategy/Program | Best Fit For | Primary Advantage | Trade-Off to Evaluate |
|---|---|---|---|
| Conventional | Buyers with strong credit and larger down payments | PMI can be removed once equity builds | Mortgage insurance cost rises as down payment shrinks |
| FHA | Buyers with lower down payments or thinner credit | Flexible qualification | Upfront and annual MIP, sometimes for the life of the loan |
| VA | Eligible veterans and service members | No monthly mortgage insurance | Funding fee unless exempt |
| DSCR/Non-QM | Investors and self-employed borrowers using alternative documentation | Qualifies on property cash flow or bank statements | Possible prepayment penalty and different fee structure |
Step 7: Compare Two Estimates and Decide What to Ask Before You Lock
To compare fairly, line up two Loan Estimates with the same loan amount, loan type, lock period, and closing date. A difference in any of these will distort the result. Then compare these figures, not just the rate:
- Section A origination charges, including points.
- Section J total closing costs.
- The five-year total in the Comparisons box.
- Estimated cash to close.
- Whether escrows and mortgage insurance are treated the same way in both.
Then bring questions to your broker:
- What does each point buy, in monthly savings and in break-even months?
- Is the lock period long enough to cover my closing date?
- What events would trigger a revised Loan Estimate?
- Is the credit check at this stage a hard inquiry?
If you are holding an estimate from a large national name such as Rocket Mortgage or Movement Mortgage, you are welcome to bring it to Duane Buziak for a program-fit review. The goal is not to beat a number. It is to check whether the program, term, and point structure suit your plans. A NoTouch Credit Pull lets that review start without a hard inquiry on your credit.
Two mistakes to avoid. First, do not wait to shop until after you have paid for an appraisal, since that fee is usually spent for that file and you may pay it twice. Second, do not let a rate lock expire. An extension can cost money, and a lapsed lock may leave you with whatever the market offers that day.
Keep the Estimate Until the Closing Disclosure Arrives
Hold on to your signed Loan Estimate. At least three business days before closing you should receive the Closing Disclosure, and the two documents should be read side by side. Check the loan terms, the zero-tolerance charges, and cash to close against your original estimate, and raise any difference with your broker right away.
If you would like a second set of eyes, send your estimate to Mortgage Shopping (Supra Mortgages / Duane Buziak Mortgage Maestro) for a strategy review. Stop overpaying on your mortgage and discover wholesale rates that could save you thousands over the life of your loan. Talk to Duane today for a no-obligation rate comparison with no credit impact, and see exactly how much you can save with our independent mortgage expertise. The right mortgage is the one that fits your plans, not just the one with the lowest number on a rate sheet.
